Vehicle decal installation is the job of fitting printed or cut vinyl graphics (logos, lettering, phone numbers, stripes) onto a car, van, truck or two-wheeler so they sit flat, line up properly and stay put for years. At Shree Shyam Signages we design the decal, print it on automotive-grade vinyl and install it ourselves, for single private cars and for company fleets across Kolkata.
Most decals that fail don’t fail because of the print. They fail because someone stuck them on a dusty panel in an open lot, in 35°C heat, without cleaning off the wax first. Installation is where the money is saved or wasted.
A proper job has four parts: measuring the panels, designing artwork that fits the body lines, printing and laminating the vinyl, and applying it on a clean, dry surface with the right tools. The application itself is the short part. On a hatchback door logo it can take under an hour. A full side panel on a Tata Ace or a Bolero Pickup takes longer, because the vinyl has to be worked around handles, rivets and curves without stretching the print out of shape.
We fit decals on painted metal, glass, plastic bumpers and fibre body panels. Rubber seals and heavily textured plastic are the two surfaces we avoid, since vinyl adhesive doesn’t hold well on either.
Custom car decals are rarely one-size jobs. Here’s what clients usually come to us for:
If you need the whole body covered rather than a few panels, that’s a wrap, and our team handles car wrap graphics as a separate service.
A car decal gets seen for two or three seconds, usually at a traffic signal or while it’s moving. That changes how you design it. We keep the brand name and one contact detail big enough to read from about 10 metres, which for a door panel means lettering of roughly 8 to 10 cm height. Thin script fonts and long service lists look fine on a laptop screen and turn into a blur on Park Circus connector traffic.
Colour contrast matters more than colour choice. A navy logo on a black Scorpio disappears. In that case we add a white outline or move the logo onto a contrasting panel. We also check body lines before finalising artwork, so a phone number doesn’t end up split across the gap between two doors.
If you don’t have print-ready artwork, our designers can build it from your logo or from scratch. Businesses that need a logo first can start with our business identity design service and carry the same look onto the vehicle.
We measure the panels you want branded, or work from clear photos with a measuring tape in frame.
You get a visual of the decal on a photo of your actual vehicle model before anything is printed.
The decal is printed on automotive vinyl and laminated so the ink isn’t exposed to sun and rain.
The panel is washed, dried and wiped with isopropyl alcohol to remove wax, polish and road film.
We position the decal with a tape hinge, peel the backing in stages and press it down with a squeegee from the centre outward. Small decals and cut lettering are sometimes applied wet for easier positioning.
Edges are trimmed and heat-sealed around curves, trapped air is cleared, and we tell you when it’s safe to wash the vehicle.
We do the work under cover, never on an open roadside. In Kolkata that’s not fussiness. Fine dust from traffic and construction settles on a panel within minutes, and every speck trapped under the vinyl shows as a bump.
| Vinyl type | Best for | Typical outdoor life | Notes |
|---|---|---|---|
| Calendered vinyl | Flat doors, tailgates, short campaigns | 2 to 5 years | Most affordable; not for deep curves |
| Cast vinyl | Curved panels, bumpers, long-term branding | 5 to 8 years | Conforms to curves without shrinking back |
| One-way vision (perforated) | Rear and side windows | 1 to 3 years | Driver can see out; check rules on glass coverage |
| Reflective vinyl | Trucks, ambulances, night-time visibility | 5 to 7 years | Lights up under headlights |
Those lifespans are typical manufacturer ranges and depend on sun exposure and how the vehicle is washed. A car parked outdoors all day in Kolkata will age faster than one kept in a basement garage.
Our honest view: for a business vehicle you’ll keep for three years or more, pay the extra for cast vinyl. Calendered vinyl on a curved bumper is the most common failure we’re called in to replace.
Decals make sense when you want branding on part of the vehicle, need it done in a day, and may want to remove it later without touching the paint. A full wrap suits you when you want the whole colour changed or a large printed image across the body. Paint is permanent and the hardest to undo when you sell the vehicle. For most small businesses in Kolkata, a door logo plus a rear contact strip gives most of the visibility at a fraction of what a wrap costs.
When you’re branding five or fifty vehicles, consistency is the whole point. Every van should carry the logo at the same height and position, so the fleet looks like one company in photos and on the road. We keep a master template for each vehicle model and reuse it for reprints and new additions. Larger programmes, including scheduling and replacements, are covered under our fleet branding services.
One practical tip from fleet jobs: order a few spare decal sets. A fender-bender on one van shouldn’t leave it unbranded for two weeks while a single piece is reprinted.
There’s no fixed rate card for decals, because two “door logos” can be very different jobs. The price depends on:
Share your vehicle model, a photo and what you want on it, and we’ll send a clear quote.
Wait 48 to 72 hours before washing the vehicle so the adhesive can bond fully. After that, hand washing is best. Keep pressure-washer nozzles at least 30 cm from the decal edges, and skip harsh solvents or petrol near the graphics. If you spill fuel on a decal, rinse it with water straight away. Avoid paste waxes on the vinyl itself.
When you’re ready to remove a decal, a little heat from a hair dryer softens the adhesive so it peels off cleanly. On factory paint in good condition, good-quality vinyl comes away without damage. Repainted panels are the exception, so tell us if your vehicle has had body work.
Send us your vehicle model and a side-view photo, and we’ll come back with a mock-up and price. You can also browse past vehicle jobs in our gallery, or contact our Kolkata team at 22, Lake Place, 1st floor, Kolkata 700029. Call us or email us to book a slot.
A door logo or rear strip on one car usually takes one to two hours, including surface prep. Large side graphics on a van can take most of a day. Fleet jobs are scheduled in batches so vehicles aren’t off the road at the same time.
No, not on factory paint in good condition. Quality vinyl peels off cleanly with gentle heat. Repainted or touched-up panels are riskier, because the new paint may not bond as strongly to the metal underneath.
Calendered vinyl typically lasts 2 to 5 years outdoors and cast vinyl 5 to 8 years. Daily sun exposure and pressure washing shorten that.
Yes, after 48 to 72 hours. Hand washing is gentlest, and keep a pressure-washer nozzle well away from the decal edges.
Yes, using one-way vision vinyl that lets the driver see out. Coverage on windscreens and windows is regulated, so we keep the driver’s line of sight clear and advise you on how much glass can be covered.
Go for a decal if you want a logo, contact details or some styling on a few panels at a lower cost. Choose a wrap if you want to change the whole colour of the vehicle or run one large image across the body.
No. Number plates must show only the registration number in the approved format, so we don’t put decals, logos or names on them.
Either works. Send print-ready vector files if you have them. If not, our design team will create the artwork and show you a mock-up on your vehicle before printing.
We’re based in Kolkata and handle most installations here. For fleet orders elsewhere, get in touch and we’ll tell you what’s possible for your location.
