Skip to main content

Shree Shyam Signages

LED Video Walls

LED Video Wall Solutions for Kolkata Showrooms, Offices and Events

A good LED video wall makes a lobby, showroom or stage look finished. A bad one gets switched off within months because it’s too bright, too grainy or too awkward to repair. The panel brand is rarely the cause. The problem starts earlier: nobody measured the room properly, the pixel pitch was guessed, or the wall behind the screen couldn’t take the weight.

Shree Shyam Signages looks after that whole chain in Kolkata. We survey the site, specify the LED video wall panels, build the mounting structure, install, calibrate and service the screen afterwards. You deal with one team from the first visit onwards.

One thing we’ll say plainly: we’re system integrators, not panel manufacturers. For you that’s an advantage. We aren’t tied to one factory’s catalogue, so we recommend whichever panel suits your viewing distance and budget.

Planning a wall?

Book a free quote or send the room size and a couple of photos on WhatsApp.

What is an LED video wall?

An LED video wall is a large display built from modular LED cabinets joined edge to edge so they behave as one screen. There are no bezels between tiles, which is what separates it from a grid of LCD monitors. Size is flexible, from a two-metre reception backdrop to a full building front.

The cabinets connect to a video controller that splits one source across every tile. That controller, plus the structure and power behind the screen, is where integration earns its fee. Buying the panels is the easy part.

LED video wall solutions for different spaces

Showrooms and retail stores

People look at a moving screen before they look at a poster. Retailers usually put the wall near the entrance or billing counter and change the content weekly: a festive offer, then a new arrival, nothing to reprint. Shoppers stand close, so showrooms tend to need a fine pitch. Many clients also pair the screen with LED glow sign boards on the facade, so the branding reads the same from the pavement and from inside.

Corporate offices and lobbies

Reception walls, boardrooms and town-hall spaces are the usual jobs. A lobby wall can run a visitor welcome, company news or live dashboards. Colour temperature matters more than people expect, because a cold-white screen beside warm-lit logo lettering looks wrong. We tune the wall to sit with the rest of your commercial signage, so the whole entrance feels like one design.

Events, stages and exhibitions

Stage backdrops and exhibition booths need walls that go up fast and come down undamaged. Rental-style cabinets with quick-lock edges are made for that. For a two-day show, we’d usually advise against a permanent-grade build. You’d be paying for strength you won’t use. A screen above eye level also does a quiet job on a crowded floor, looping the product demo so your team isn’t repeating the pitch all day.

Hotels, banquet halls and convention spaces

One wall often works two shifts: guest welcome in the lobby on weekdays, wedding or conference branding in the banquet hall at weekends. These screens run most days of the year, so colour consistency after a year or two matters more than the day-one picture. Ask any installer how they’d match a replacement module from a later batch.

Outdoor facades and hoardings

Facing the street changes everything: brightness, sealing, wind load, permissions. A wall on a building front usually sits alongside a fascia or pylon, so we plan it together with your outdoor sign board instead of treating them as two separate jobs.

Indoor vs outdoor LED video wall: what changes

The same panels won’t do both jobs. These are typical ranges, and exact figures depend on the panel chosen.

Indoor wall Outdoor wall
Typical pixel pitch P1.2 to P3 P4 to P10
Brightness Around 800 to 1,500 nits 5,000 nits and above
Weather protection Not needed, ventilation matters IP65 on the front face is the usual benchmark
Nearest viewer 1 to 6 m 8 m and beyond
Common spots Showrooms, lobbies, boardrooms, banquet halls Facades, mall exteriors, junction hoardings

An indoor panel outdoors fails quickly. An outdoor panel indoors blinds people. Brightness left at factory settings is a common complaint with showroom screens.

How to choose the right pixel pitch

Choose pixel pitch from the nearest viewer, not from the price. As a rule of thumb, the minimum comfortable viewing distance in metres is about the same as the pixel pitch in millimetres. A P2.5 wall suits people standing 2.5 m away or further. Manufacturers’ charts vary a little, so treat it as a starting point.

Pixel pitch Nearest viewer Usual use
P1.2 to P1.8 1.5 to 2 m Boardrooms, control rooms, premium lobbies
P2 to P2.5 2 to 3 m Reception walls, showrooms
P3 to P4 3 to 5 m Malls, stages, banquet halls
P5 to P10 6 m and beyond Outdoor facades and hoardings

Most buyers pay for a finer pitch than the room needs. If nobody will stand closer than four metres, a P1.5 wall costs far more and looks no better. We’ll show you a mock-up on a photo of your own space before you commit.

Acrylic vs PVC Sign Boards

LED video wall installation: how we run it

Good LED video wall installation is mostly preparation. Our sequence:

  1. Site survey. We measure the wall or stage, check the surface and load, locate power and data points, note ambient light and mark the cable route.
  2. Design and panel selection. Size, aspect ratio, pitch, brightness and controller are fixed, and you see the layout on a drawing before anything is ordered.
  3. Structure and mounting. A subframe, truss or pole structure built for your site and the weight of the cabinets.
  4. Power and signal. Dedicated supply, earthing and surge protection, the controller and cabling, plus a backup signal path if the screen can’t afford to go blank.
  5. Calibration and testing. Brightness and colour balanced across cabinets, content tested at its real resolution.
  6. Handover. A short walkthrough for your team and a service plan.

Four ways to mount an LED video wall

Method Works best for Check first
Wall-mounted or embedded Lobbies, showrooms, reception areas Wall must be load-bearing. A metal subframe corrects an uneven surface, and walls are rarely flush.
Hanging Atriums, events, double-sided displays Ceiling or truss must carry the full weight. Rigging needs a trained crew.
Floor-standing Stages, exhibitions, rooftops Rear support frame and base, plus protection from knocks.
Pole or pillar Roadside and plot-front hoardings Foundation design and wind load.

Whichever you pick, decide how technicians will reach the modules. Front-service cabinets can be swapped from the viewing side. Rear-service ones need a walkable gap behind. Skip this question and a ten-minute module swap turns into a day of dismantling.

Five mistakes that ruin an LED video wall

  1. Choosing by size instead of viewing distance. A big wall with the wrong pitch looks grainy up close or wasteful from far away. Fix the distance first, then the size.
  2. Forgetting service access. Every wall needs a repair eventually. Plan how a technician reaches a dead module before the structure goes up.
  3. Trusting the wall behind it. Old plaster and brick lie. Check the load and flatten the surface with a frame.
  4. Designing content for the wrong shape. A 16:9 video stretched across a 3:1 wall looks awful. Get the canvas resolution before your designers start.
  5. Leaving brightness at maximum indoors. It tires eyes, wastes power and ages the LEDs sooner. Calibrate to the room.

What changes when the wall is in Kolkata

Humidity and monsoon rain come first. Ask how the cabinets are sealed and how the back is ventilated, since trapped moisture is a common cause of module failure. Voltage dips are the quieter problem. Proper earthing, surge protection and a UPS or stabiliser on the controller cost little next to a dead power supply.

And if the wall faces a public road, you’ll usually need advertising permission from the local civic body, which in Kolkata means the KMC. Sort that out before you order panels.

Cut vinyl lettering on a glass window
3D acrylic letters on shop wall

What decides the cost of an LED video wall

We don’t publish a rate card, because two walls of the same area can price very differently. The things that move the number are pixel pitch (the biggest lever), indoor or outdoor build, cabinet type and service access, structure and mounting, the controller, power and cabling, and any content or software needs.

Ask every supplier to split the quote along those lines. A single lump sum can’t be compared with anyone else’s.

Why Shree Shyam Signages for an LED video wall in Kolkata

We’re a signage company first. A video wall rarely arrives alone. It sits beside a logo, a lit fascia, a reception desk or a wayfinding system, and we design the lot together so nothing clashes. Because we integrate rather than manufacture, we can quote more than one panel option and tell you plainly which one we’d pick.

Our office is at 22 Lake Place, Kolkata 700029.

Frequently Asked Questions

Work backwards from the nearest viewer and the shape of your content. Height usually follows the room and the viewing distance, and width follows the content ratio. Send dimensions and photos and we’ll sketch a few sizes on your actual wall.

It depends on the structure more than the screen. An indoor wall on a flat, load-bearing surface can often be mounted and calibrated within a few days. Large outdoor walls need structural work, power and permissions first, so we give a schedule after the site survey.

No. We’re system integrators. We pick panels from established makers to fit each project, then design, install and service the whole system. That’s why we can compare options instead of selling you one.

Good panels are rated around 100,000 hours, but 7 to 10 years is a safer planning figure for a wall that runs daily. Brightness settings, ventilation and cleaning make most of the difference.

LED if you want a large, bezel-free picture or need real brightness. A tiled LCD wall can suit a small space with close viewers and a tight budget, though you’ll always see seams.

No. Indoor cabinets aren’t sealed against rain and dust, and they aren’t bright enough for daylight. Use an outdoor-rated wall.

Ask for the wall’s exact pixel resolution and aspect ratio before any content is made. Anything created at the wrong ratio gets stretched or letterboxed. We can share the canvas size with your designers.

Want a straight answer before anyone visits?

WhatsApp the room dimensions and two photos to +91 90620 93836. We’ll tell you what size, pitch, and structure make sense.